Solar Panel Installation on Your Own Roof

Solar panel installation can be a difficult and sometimes time-consuming task. The panels are very expensive and often require special installation techniques to ensure optimum performance. You also need to consider the placement of the solar array in order to get maximum exposure to direct sunlight. When mounting your solar panel, you need to make sure that it is placed on a good and strong roof so that its maximum collecting area is maximized. When installing solar panels, you will also want to think about the use of an open area where there is ample room for the addition of even more panels down the line. Ideally, solar panels should be placed on a flat roof that face the direction that the Sun comes down from.

Before mounting your solar panel installation, it is important to measure the area that you will be working on so that you know the dimensions of the equipment you will need. This will help you determine the size of the solar cells that you will need to mount the array. Typically, open per watt solar cells come with a pre-drilled hole to mount them. These types of solar cells work great if you plan to add more panels after your initial installation. If you are just starting out with this equipment, then the smaller and cheaper per watt cells may be just fine for your installation. There are also special mounting kits available for these smaller cells that can be bought online and in some home improvement stores.

Once you have ordered the solar cells and were given a set of instructions to follow, the mounting process is quite simple. If you already have a flat roof then it is important to remember that you will need to install the cells on the flat roof first. Now when you are ready to drill the holes in your walls, the best direction to start is to shoot straight down and away from the house. This way you will be sure not to hit any of your neighbors below. Once you have drilled the needed holes, screw the mounting screws in.

The next step in the solar panel installation process is to assemble all of the necessary parts. All of the parts that you need to complete the installation can be purchased at your local home improvement store or even online. One important part in mounting your solar energy panels is the photovoltaic module. This is where your electrical current will come from. It will attach to the solar cells and create your electrical output.

When your solar panel installation is complete, the last thing you need to do is set your electrical system up so that you can start using your new homemade electricity system. You will need an electrician to hook up all of the electrical wires to your new homemade electricity system. Once you have done this, test all of the connections to make sure they are not broken. If you are not sure about whether or not the wires are properly connected, call the electrician back and ask him to come and look at it for you. The electrician should be able to tell you if the wires were properly connected and if the wiring was done correctly. In finding the best solar panel installation services, view here for more info.

If everything goes well, installing solar panels on your own roof should be a breeze. You should be able to easily follow instructions that are found online. However, if you experience any problems along the way, there are many online videos and books to help you. Before you begin installing your solar arrays, you might want to install a small fan on your roof to circulate the air in your attic. These simple things can help you tremendously when it comes to completing the job and getting started on your own home made electricity source. 
Check out this post that has expounded on the topic: https://simple.wikipedia.org/wiki/Solar_panel.